Golden Artist BLACK Gesso 8 oz

Shop Golden Artist Paint Online Shopping

GOLDEN Gesso is a flexible liquid ground that seals, protects, and gives "tooth" to substrates, which promotes paint adhesion. It is formulated to accept a wide variety of media on many commonly used painting surfaces. It comes ready-to-use, but can be mixed with water for thinner applications. When applied in thin layers, GOLDEN Gesso will conform to a variety of textured surfaces.

GOLDEN Gesso is available in Black or White, and can be mixed with GOLDEN Acrylics to produce a range of colored grounds (see below).

PRODUCT APPLICATION

Application Methods

GOLDEN Gesso can be brush, roller, trowel or spray-applied. Dilution of the Gesso is only necessary for spray application, but may be desired for brush or roller applications as well. When diluting with water, we recommend a maximum dilution of 25%. Any mixture within this range offers little risk of cracking or other adverse effects.

Mixing With Other GOLDEN Products

GOLDEN Gesso can be tinted with GOLDEN Heavy Body Acrylics, Fluid Acrylics, Matte Fluid Acrylics, or High Load Acrylics. The High Loads most closely resemble the Gesso since they both possess a high pigment load, a velvety, low-gloss sheen and a similar viscosity. Matte Fluid Acrylics are the best option after the High Loads. Tinting with High Loads is recommended since they will alter the attributes of the Gesso the least. Due to the high pigment/solid concentration, High Load Acrylics and Gesso should only be applied in thin layers. Thick, single-applications of these products may crack.

Flexibility

Generally, canvas coated with GOLDEN Gesso may be rolled up without cracking. Cracking may occur if a canvas is overly flexed or stretched, especially at colder temperatures. For more information about handling and transporting paintings, please refer to the Just Paint Newsletter, Issue 11, article Safe Handling and Transportation of Acrylic Paintings http://www.goldenpaints.com/justpaint/jp11article1.php.

Multiple Coats

Although one coat of Gesso will provide good adhesion, it may sometimes leave pinholes or uncovered areas. It is recommended to apply at least two coats of Gesso to any surface, but especially when painting on canvas or linen. The first coat will penetrate the support and reduce the likelihood of paint de-lamination. The second coat bonds with the first layer and begins to even out the surface. Subsequent layers of Gesso will produce an even smoother surface. For spray-application, you may have to apply more than 2 coats to achieve a film similar to a brush application. Spray Application Dilutions

The degree to which the GOLDEN Gesso needs thinning depends on what type of spray equipment is being used. No dilution of the Gesso may be required when using equipment with relatively large orifices and substantial pressure. Thin Gesso for spraying by blending with GOLDEN Airbrush Medium, which reduces viscosity, improves flow and tip-dry, and promotes leveling. Start with a mixture of 1 part Airbrush Medium to 1 part Gesso and test spray quality. Additional reduction with the Airbrush Medium may be required, especially with smaller nozzle equipment and lower air pressures.

Sanding

While sanding GOLDEN Gesso is possible, the heat generated in the process will “gum up” the sandpaper rather quickly. Wet sanding will give very good results while reducing dust production. For optimal sanding results on inflexible supports please refer to our Product Information Sheet for GOLDEN Sandable Hard Gesso: http://www.goldenpaints.com/technicaldata/sandable.php ADDITIONAL INFORMATION

Use With Oil Paints

Oil Paints can be applied over acrylic Gesso. There is adequate adhesion due to the porosity of the acrylic. To control the penetration of linseed oil into support fibers, a two coat-application of GAC 100 or GAC 700 is recommended before applying Gesso. This seals the substrate and greatly lessens the amount of oil penetration.